If you’ve bought a router in the last few years, there’s a good chance it was a TP-Link. The brand has long been the go-to for affordable Wi-Fi gear, but it’s been having a rough year in Washington, and the latest development isn’t helping.
Here’s the short version. In mid-October, the FCC’s engineering office sent TP-Link two letters saying that four of its router models appear to have been certified using inaccurate paperwork, and that three of those four transmitted at stronger power levels than they were approved for when tested. The models named in the reports are the Archer GE800, the Archer BE670, the Deco BE67 mesh system, and the TL-WR3602BE travel router. In the agency’s lab testing, the Deco BE67 overshot its 6 GHz limit by just over 4 dB, while the BE670 ran about 2 dB hot on the same band.
Basically, this isn’t a spying or hacking accusation. The findings are strictly about radio power, not cybersecurity. It’s also worth noting that the FCC bought these routers off retail shelves to test them, and the letters are preliminary. Nothing in them announces a fine, a recall, or a ban, just yet. TP-Link had until October 30 to answer with documentation for each device, which means that deadline just passed. I haven’t found any public word yet on what the company sent back or how the FCC plans to respond.
TP-Link is treating it as routine. The company says spot checks like this have long been a normal part of how the FCC operates, that measurements can vary a bit from lab to lab, and that it will fix anything that turns out to be a real problem.
So where does the ban talk come from? Some industry experts say that a confirmed violation could hand the FCC a reason to pull TP-Link routers that are already sitting on store shelves, not just block future models. Lawyers who follow FCC procedure also point out that power checks can happen long after a product goes on sale. TP-Link has been here before, too. It went through a similar power-output investigation back in 2016 and settled with a fine. Some legal observers think this time could play out differently, given how much other scrutiny the company is under.
And there is plenty of it. The Commerce Department has previously floated blocking new sales of TP-Link products over concerns about the company’s links to China. TP-Link rejects that, saying its US business is an independent California company that has fully separated from its Chinese namesake and does not enable any foreign surveillance. It has also argued that its market share is smaller than critics claim, though estimates vary widely, with some analysts putting it far higher than the company does. Several state governments have also filed lawsuits over its China ties and router security, which TP-Link says are built on faulty premises.
On top of that, there’s the broader rule the FCC rolled out in March. Under it, new foreign-made router models can’t be sold in the US without special approval. Competitors like Netgear, Asus, and Eero have already been cleared. TP-Link hasn’t. That’s why its newest Wi-Fi 8 router is still unavailable here. The company has been trying to make its case by promising close to a billion dollars in US research and manufacturing if its Wi-Fi 8 models get conditional approval, and it recently announced plans to assemble future routers in Mississippi with an American manufacturing partner, Key Tronic. So far, though, no approval has been reported, and there’s no set date for a decision.
So should you worry if you own a TP-Link? Probably not. The broader foreign router rules cover new imports, so the router you have now will keep working just fine. Existing stock already in the US can still be sold for the time being. If the power issue is confirmed, the most likely outcome would be a fix on TP-Link’s end, such as a firmware update that lowers transmit strength, though nothing like that has been announced. The real unknown is whether regulators decide to go further than that.
For now, it’s a wait-and-see situation, and the next few weeks should tell us a lot. If you’re shopping for a new router, it may be worth keeping an eye on this before you buy.



