Thunderbolt 5 continues to take things by storm as it delivers some of the best performance for professionals and enthusiasts looking to get the most out of their devices. In the case of the Acasis TB501Pro Thunderbolt 5 NVMe SSD Enclosure, there is a focus on powerful transfer speeds. Making it a perfect solution for video editing and other tasks that require a lot of throughput.
The latest version of the Thunderbolt interface (Thunderbolt 5/TB5) brings with it some of the best transfer speeds we have ever seen from external drives. The new TB501Pro takes advantage of this so that you can push the read/write speeds of the latest PCIe Gen 5 NVMe models close to their limits, or completely hit the limits of older-generation models.

External NVMe enclosures allow you to get the most out of your external storage when it comes to both capacity, speed, and physical size. This makes for a huge improvement compared to most USB thumb drives. It is also the most common type of external storage now for professionals who work with video.
Many of these models (like this one) also come with active cooling (a fan) due to how hot NVMe drives can get when they are pushed, helping to avoid thermal throttling. This makes active cooling a key variable when weighing in the score of these, since there is no point in taking a blazing fast NVMe mobile if the heat of it is going to create a noticeable handicap.

This one comes with a typical length cable, just under 20 inches, that allows it to easily plug into the USB port of a laptop or mini PC. It also comes with a few thermal pads, so you have an extra. Along with some typical rubber screw alternatives that allow this to be completely toolless, since you don’t need a tool to open it either.

It even comes with plastic spacers that can be custom-snapped to the size of your NVMe, if you are using a smaller M.2 format vs the normal full-length M.2 stick. That way, they don’t have to have multiple (rubber) screw points, as all drives can be adapted to full-size (essentially).

The instructions are pretty straightforward since opening it requires you to simply grab the side of the enclosure with your thumb and finger, pinch, and lift open. It pops right open, where you have immediate access to installing/inserting an NVMe drive.
You place one of the thermal tapes onto the top of the NVMe and replace the lid. This helps to transfer heat from the drive to the aluminum enclosure, where it can spread and dissipate, with heat from the bottom and board being dissipated through the end side via its active cooling.
The fan is supposed to kick in once the drive reaches a specific temperature, else it remains off to save any potential noise it might add to your space–which isn’t much (we didn’t even hear or feel anything from the fan, so it is most likely a very mild fan solution).

In our testing of the enclosure, we started off by grabbing a random NVMe, which ended up being the Kingston A1000. It is just a PCIe Gen 3 model, which isn’t that fast compared to current drives in the market, so we didn’t expect much. We immediately started hitting read speeds of around 1.3GB/s, which hit the limit of the drive itself.
We took that drive out and tossed it into the “this might be too old for modern testing now” drawer, and moved on to use a WD_BLACK SN8100 NVMe we readily had waiting for this story. This drive launched last year and brings with it everything that PCIe Gen 5 has to offer. And sure enough, the results skyrocketed and started averaging around 5,000-6,000 MB/s, which allowed us to find the limitation of the chipset within the enclosure.
This made for a fair experience when it comes to external enclosures and averaged around the same with similar drives. Thunderbolt 5 is certified for up to 80Gbps (gigabits per second) worth of traffic, which would place gigabytes around 10GB/s, but that is just theoretical since you have to consider overhead and other things that might be riding on the same TB5 interface/chain. Typically, most TB5 NVMe enclosures will likely max out around 6,000 to 8,000 GB/s.

Of course, you will find yourself with limitations if your computer doesn’t support TB5. This drive will work with any USB connection beyond USB 3.0 (this becomes its lowest supported USB type based on power limitations since this drive isn’t externally powered). As you make your way up the generations of USB to USB4 2.0 and TB5, you tap into the sheer power of this model. So you could use earlier generations (down to 3.0), but with noticeable sacrifices to transfer speeds. But it is nice having backwards compatibility with USB devices like this.
Our Conclusion
This makes for a great external enclosure for anyone looking to get the highest transfer speeds they can (on average) for their external drives. Great for video professionals or even someone who commonly moves drives between systems or retrieves information from old drives. I point out the latter since it is so incredibly easy to swap the drive in and out of this model.
With the averages we were getting from the drives we tested against it, we felt this landed within the general expectations of a TB5 enclosure. Leading to a positive score for us and a positive reaction from our team.
It is currently on sale for $219, making for a much better price (as NVMe price inflation is bad enough as it is). Anything related to TB5 is going to be pricey right now since it’s still a new technology, Intel typically charges a hefty price for its JHL9480 chips, and every new product/model launch has to be certified (a paid requirement). It adds up pretty fast, so it’s always nice to see something go on sale.
Additional Images:
Specifications:
- Model: TB501Pro
- Read/Write Speed Support: =/> 6000MB/s
- Dual Chip Design: JHL9480, RTL9210
- Compatible with: Thunderbolt 5/4/3, USB4/3.2/3.1/3.0
- Supported Capacity: Up to 8TB 2230/2242/2260/2280 M.2 NVMe SSD
- Supports PCIe Gen5 NVMe SSDs (e.g., Samsung 9100 Pro)
- Plug-and-Play, Tool-Free, Adjustable Cooling Fan
Are you a manufacturer or distributor that would like us to test something out for review? Contact us, and we can let you know where to send the product, and we will try it out.












